P Microbushing
Polyshot P-Microbushing is installed into a gate well detail machined in the “A” half of the mold by the mold maker. This bushing can also be fitted with a PR Gate Interface Cap, to allow installation into a .625″ diameter hole machined in the “A” half of the mold. The PR configuration will leave a slight “ring” witness mark if gated directly into the part surface.
P-075SC Bushing
The Polyshot P-075SC Bushing is installed into a gate well detail machined in the “A” half of the mold by the mold maker. This bushing can also be fitted with a PR Gate Inter face Cap, to allow installation into a .7500″ diameter hole machined in the “A” half of the mold. The PR configuration will leave a slight “ring” witness mark if gated directly into the part surface.
P-100C Bushing
Polyshot P-100C Bushings are installed into a gate well detail machined into the “A” half of the mold by the mold maker. This bushing can also be fitted with a PR gate interface cap, to allow installation into a 1.0000″ diameter hole machined into the “A” half of the mold. The PR configuration will leave a slight “ring” witness line if gated directly into the part surface.