Description
The Polyshot P-075SC Bushing is installed into a gate well detail machined in the “A” half of the mold by the mold maker. This bushing can also be fitted with a PR Gate Inter face Cap, to allow installation into a .7500″ diameter hole machined in the “A” half of the mold. The PR configuration will leave a slight “ring” witness mark if gated directly into the part surface.
Bushing Body Section
Click on the part number below to download the files.
| Part Number | Heated "A" Length |
|---|---|
| P-075SC-875 | 0.875" |
| P-075SC-1.375 | 1.375" |
| P-075SC-1.875 | 1.875" |
| P-075SC-2.375 | 2.375" |
| P-075SC-2.875 | 2.875" |
| P-075SC-3.375 | 3.375" |
To order a P-075SC Series Heated Sprue Bushing, please submit a request for the quote below.
Gate Well Detail
| Gate Ø | Gage Dimension |
|---|---|
| .0270 | .2178 |
| .0280 | .2173 |
| .0290 | .2168 |
| .0300 | .2163 |
| .0310 | .2158 |
| .0320 | .2153 |
| .0330 | .2148 |
| .0340 | .2143 |
| .0350 | .2138 |
| .0360 | .2133 |
| .0370 | .2128 |
| .0380 | .2123 |
| .0390 | .2118 |
| .0400 | .2113 |
| .0410 | .2108 |
| .0420 | .2103 |
