Description

Polyshot P-100C Bushings are installed into a gate well detail machined into the “A” half of the mold by the mold maker. This bushing can also be fitted with a PR gate interface cap, to allow installation into a 1.0000″ diameter hole machined into the “A” half of the mold. The PR configuration will leave a slight “ring” witness line if gated directly into the part surface.

Click to Enlarge

Bushing Body Section

Click to Enlarge

Click on the part number below to download the files.

Part Number Heated "A" Length
P-100C-875 0.875"
P-100C-1.375 1.375"
P-100C-1.875 1.875"
P-100C-2.375 2.375"
P-100C-2.875 2.875"
P-100C-3.375 3.375"
P-100C-3.875 3.875"
P-100C-4.375 4.375"

To order a P-100C Series Heated Sprue Bushing, please submit a request for the quote below.

Request a Quote

Gate Well Detail

Gate Ø Gage Dimension
0.0270 0.2178
0.0280 0.2173
0.0290 0.2168
0.0300 0.2163
0.0310 0.2158
0.0320 0.2153
0.0330 0.2148
0.0340 0.2143
0.0350 0.2138
0.0360 0.2133
0.0370 0.2128
0.0380 0.2123
0.0390 0.2118
0.0400 0.2113
0.0410 0.2108
0.0420 0.2103
0.0430 0.2098
0.0440 0.2093
0.0450 0.2088
0.0460 0.2083
0.0470 0.2078
0.0480 0.2073
0.0490 0.2068
0.0500 0.2063
Click to Enlarge

PL-100-C Gate Well Detail

PL-100-C Gate Well Detail
Click to Enlarge
Gate Ø Gage Dimension
.0270 .2178
.0280 .2173
.0290 .2168
.0300 .2163
.0310 .2158
.0320 .2153
.0330 .2148
.0340 .2143
.0350 .2138
.0360 .2133
.0370 .2128
.0380 .2123
.0390 .2118
.0400 .2113
.0410 .2108
.0420 .2103