Description

M15 Pinpoint Nozzle styles afford the absolute minimum gate vestige possible. They are used when it is necessary to gate directly into the part being molded. The pinpoint nozzle features a field replaceable tip that can be easily changed by the customer if necessary. It performs well when processing unfilled resins. Hardened tip inserts are available as an option when it is necessary to mold filled resins.

When using the pinpoint nozzle, all necessary tip clearances are machined into the mold cavity by the customer. This method allows only a small pinpoint mark to be left on the part after molding.

metallic industrial machine part 3D rendering isolated on white background
Click to Enlarge

Nozzle Body Section

Detailed technical diagram of a nozzle assembly illustrating various dimensions and flow channels for industrial application, including measurements such as 1.500 diameter, 1.350 diameter, and 0.375 flow diameter at 9.5.
Click to Enlarge
Part Number Length "L" (mm) Length "L" (in)
M15-NZ-P4-R2 31.5 1.240
M15-NZ-P5-R2 44.2 1.740
M15-NZ-P6-R2 56.9 2.240
M15-NZ-P7-R2 69.6 2.740
M15-NZ-P8-R2 82.3 3.240
M15-NZ-P9-R2 95.0 3.740
M15-NZ-P10-R2 107.7 4.240
M15-NZ-P11-R2 120.4 4.740
M15-NZ-P12-R2 133.1 5.240
M15-NZ-P13-R2 145.8 5.740
M15-NZ-P14-R2 158.5 6.240
M15-NZ-P15-R2 171.2 6.740

Gate Well Detail

Gate Ø Gage Dimension
0.0250 0.2188
0.0260 0.2183
0.0270 0.2178
0.0280 0.2173
0.0290 0.2168
0.0300 0.2163
0.0310 0.2158
0.0320 0.2153
0.0330 0.2148
0.0340 0.2143
0.0350 0.2138
0.0360 0.2133
0.0370 0.2128
0.0380 0.2123
0.0390 0.2118
0.0400 0.2113
0.0410 0.2108
0.0420 0.2103
0.0430 0.2098
0.0440 0.2093
0.0450 0.2088
0.0460 0.2083
0.0470 0.2078
Gate Ø Gage Dimension
0.0480 0.2073
0.0490 0.2068
0.0500 0.2063
0.0510 0.2058
0.0520 0.2053
0.0530 0.2048
0.0540 0.2043
0.0550 0.2038
0.0560 0.2033
0.0570 0.2028
0.0580 0.2023
0.0590 0.2018
0.0600 0.2013
0.0610 0.2008
0.0620 0.2003
0.0630 0.1998
0.0640 0.1993
0.0650 0.1988
0.0660 0.1983
0.0670 0.1978
0.0680 0.1973
0.0690 0.1968
0.0700 0.1963
M15 Gate Well
Click to Enlarge

Minimum Spacing Requirements

M15 Pinpoint Spacing
Click to Enlarge

NOTE: Nozzle centerlines must be located at least 33mm [1.30″] radially away from the centerline of the nozzle interface.