Description

M11 Pinpoint Nozzle tip style affords the absolute minimum gate vestige styles afford the absolute minimum gate vestige possible. They are used when it is necessary to gate directly into the part being molded. The pinpoint nozzle features a field replaceable tip that can be easily changed by the customer if necessary. This nozzle style can mold most materials with part sizes up to 30 grams. It performs well when processing unfilled resins. Hardened tip inserts are available as an option when it is necessary to mold-filled resins.

When using the pinpoint nozzle, all necessary tip clearances are machined into the mold cavity by the customer. This method allows only a small pinpoint mark to be left on the part after molding.

Click to Enlarge

Nozzle Body Section

Click to Enlarge
Part Number Length "L" (mm) Length "L" (in)
M11-NZ-P3-R2 24.2 0.951
M11-NZ-P4-R2 36.9 1.451
M11-NZ-P5-R2 49.6 1.951
M11-NZ-P6-R2 62.3 2.451
M11-NZ-P7-R2 75.0 2.951
M11-NZ-P8-R2 87.7 3.451
M11-NZ-P9-R2 100.4 3.951
M11-NZ2-P10 113.1 4.451
M11-NZ2-P11 125.8 4.951
M11-NZ2-P12 138.5 5.451
M11-NZ2-P13 151.2 5.951
M11-NZ2-P14 163.9 6.451
M11-NZ2-P15 176.6 6.951

Gate Well Detail

Gate Ø Gage Dimension
0.0250 0.2188
0.0260 0.2183
0.0270 0.2178
0.0280 0.2173
0.0290 0.2168
0.0300 0.2163
0.0310 0.2158
0.0320 0.2153
0.0330 0.2148
0.0340 0.2143
0.0350 0.2138
0.0360 0.2133
0.0370 0.2128
0.0380 0.2123
0.0390 0.2118
0.0400 0.2113
0.0410 0.2108
0.0420 0.2103
0.0430 0.2098
0.0440 0.2093
0.0450 0.2088
0.0460 0.2083
0.0470 0.2078
Gate Ø Gage Dimension
0.0480 0.2073
0.0490 0.2068
0.0500 0.2063
0.0510 0.2058
0.0520 0.2053
0.0530 0.2048
0.0540 0.2043
0.0550 0.2038
0.0560 0.2033
0.0570 0.2028
0.0580 0.2023
0.0590 0.2018
0.0600 0.2013
0.0610 0.2008
0.0620 0.2003
0.0630 0.1998
0.0640 0.1993
0.0650 0.1988
0.0660 0.1983
0.0670 0.1978
0.0680 0.1973
0.0690 0.1968
0.0700 0.1963
Click to Enlarge

Minimum Spacing Requirements

NOTE: Nozzle centerlines must be located at least 33mm [1.30″] radially away from the centerline of the nozzle interface.