M11 Pinpoint Nozzle

M11 Pinpoint Nozzle

This tip style uses a pinpoint gate design to allow the absolute minimum gate vestige possible. The gate well area is machined directly into the mold cavity by the mold maker. This nozzle can be used for most resins with part sizes of 30 grams or less. Can run glass or mineral filled resins with an optional tip.

M11VG Valve Gate Nozzle

M11VG Valve Gate Nozzle

This tip style uses a thin reverse taper sprue design. It is often used when gating into a runner or parts where the sprue is not of concern. It is very effective with filled resins. The resulting sprue is approximately 3/8” long and weighs less than one half of a gram.