Description

M15VG Valve Gate Nozzle style eliminates the gate vestige. They are used when it is necessary to gate directly into the part being molded without leaving a vestige. The valve gate nozzle features a field replaceable tip that can be easily changed by the customer if necessary. It performs well when processing filled or unfilled resins and is best for part sizes between 30 and 125 grams.. The valve pins can be actuated by pneumatics or hydraulics.

When using the valve gate nozzle, all necessary tip clearances are machined into the mold cavity by the customer. This method allows for the smallest witness mark to be left on the part after molding. The valve gate pin mark will resemble an ejector pin mark on the part.

M15VG-NZ-PX-R2 Assembly
Click to Enlarge
Polyshot Accutrak Technology

Polyshot Accutrak Technology was developed to improve product quality in injection molded parts. The Accutrak design allows for quick and easy color changes. This reduces waste and down time.

Features include:

Burn-free gates, no black specks or streaks | Completely sweeps the gate well area clean each slot | Valve gate versions offer very short stroke reducing the hydraulic action in the gate area | Valve pin stays fully engaged and guided 100% of the time | Pinpoint style Accutraks are also available

Accutrak Valve Gate Technology
Click to Enlarge
Conventional Valve Gate Technology
Click to Enlarge

Nozzle Body Section

M15VG
Click to Enlarge
Part Number Length "L" (mm) Length "L" (in)
M15VG-NZ-P4-R2 31.8 1.250
M15VG-NZ-P5-R2 44.4 1.750
M15VG-NZ-P6-R2 57.2 2.250
M15VG-NZ-P7-R2 69.9 2.750
M15VG-NZ-P8-R2 82.6 3.250
M15VG-NZ-P9-R2 95.3 3.750
M15VG-NZ-P10-R2 108.0 4.250
M15VG-NZ-P11-R2 120.7 4.750
M15VG-NZ-P12-R2 133.4 5.250
M15VG-NZ-P13-R2 146.0 5.750
M15VG-NZ-P14-R2 158.8 6.250

Gate Well Detail

Gate Ø Gage Dimension
0.030 0.2358
0.035 0.2353
0.040 0.2348
0.045 0.2343
0.050 0.2337
0.055 0.233
0.060 0.2323
0.065 0.2314
0.070 0.2305
0.075 0.2296
0.080 0.2285
0.085 0.2273
0.090 0.2261
0.095 0.2247
0.100 0.2231
0.105 0.2214
0.110 0.2196
0.115 0.2175
0.120 0.2152
0.125 0.2127
M15VG Gate Well
Click to Enlarge

Minimum Spacing Requirements

M15vg Spacing
Click to Enlarge

NOTE: Nozzle centerlines must be located at least 76mm [3.00″] radially away from the centerline of the nozzle interface.